How much solar does a flour or dal mill actually need? Most Indian mills, chakki and tiny flour units, commercial atta chakkis, small dal mills, need between 25 kW and 150 kW of rooftop solar, sized to their daytime load rather than their annual consumption, because milling energy goes almost entirely into motors that run when the sun is up.
TL;DR: Wheat milling takes about 5.7 kWh per quintal (Punjab Agricultural University field data), maize about 10.8 and oilseeds about 11.3 kWh per quintal, so even a 5-tonne-a-day chakki unit consumes roughly 250-300 units on milling alone. A dal mill running dehusking and splitting lines uses 128,000-320,000 kWh a year (TERI's Indore cluster profile). A 100 kW rooftop plant at Sun Wave's reference rate of ₹23,000/kW ex-GST costs about ₹25 lakh with GST and, at typical industrial tariffs of ₹7-8 per unit, saves ₹7.5-9 lakh a year, a payback near three years for a daylight-running mill.
Last verified: 19 November 2026
Jump to:
- Where the Energy Goes in a Mill
- Sizing the Plant to Your Mill
- Cost and Payback for a 100 kW Plant
- Roof, Structure and Location Notes
- RESCO: Solar Without Capital Outlay
- Frequently Asked Questions
Where the Energy Goes in a Mill
Milling is a motor load. Cleaning, destoning, conditioning, grinding (roller or chakki), sieving, elevators, blowers and packing run on electricity; heating needs, where they exist (dal roasting, drying), burn biomass or gas separately.
Field-measured energy intensities from Punjab Agricultural University for tiny rural mills:
| Operation | Specific energy | Notes |
|---|---|---|
| Wheat milling (chakki) | 5.7 kWh/quintal | 57 kWh/tonne |
| Maize milling | 10.8 kWh/quintal | Harder kernel, more grinding |
| Oilseed milling | 11.3 kWh/quintal | 2-3 passes to extract oil |
Source: Surendra Singh, Pannu and Jasdev Singh, "Energy requirement for milling of wheat, maize and oil seeds in tiny rural industries in Punjab", Agricultural Engineering Today (Punjab Agricultural University, Ludhiana).
Dal mills are bigger electricity users. TERI's energy profile of the Indore dal mill cluster (about 100 mills, roughly 1,500 tonnes of pulse processed a day) records typical annual electricity use of 128,000 kWh for a micro unit (about 5,000 t/yr output), 240,000 kWh for a small unit and 320,000 kWh for a medium unit, with energy at 6-8% of the final product cost. For a chakki or small commercial mill, add lighting, packing and a cold room if installed.
Two seasonal notes matter for the solar case. Wheat milling runs all year but peaks after harvest; oil extraction peaks April-June. A solar plant sized on annual averages will therefore export more surplus in low-season months, one more reason to size to daytime load.
Sizing the Plant to Your Mill
Work from monthly units (our units-to-size method shows the arithmetic), then trim to daylight hours:
- Compute your daytime share. A mill running 8 am-6 pm can use most of its generation directly. If you run a second shift or a night-shift packing line, a bigger plant still pays, but surplus export is credited at a lower rate.
- Benchmark against cluster data. A micro dal mill at 128,000 kWh/year running single daytime shifts corresponds to a plant of roughly 70-90 kW; a 5-10 t/day commercial atta chakki at 250-500 units a day corresponds to 15-30 kW. Treat these as orientation points, not design values.
- Check roof first. Small plots are the norm for mills; a 100 kW plant needs roughly 550-650 sq m of shadow-free roof or an adjacent structure. Our rooftop area guide has the per-kW figures and our factory sizing guide covers the load-profile method in full.
- Mind the kVAh tariff. Most state discoms bill mills above 10 kW in kVAh with a demand charge. Solar trims the energy line, not the demand line, model savings on energy only.
Cost and Payback for a 100 kW Plant
Sun Wave Technologies prices qualifying CAPEX rooftop C&I projects at ₹23,000 per kW at 100 kW and ₹22,000 per kW at 500 kW, ex-GST, about ₹23 lakh for 100 kW, final after site survey. With the roughly 8.9% effective turnkey GST (5% on modules since September 2025 under the standard supply-services split), a 100 kW plant lands near ₹25 lakh with tax. PM Surya Ghar's central subsidy does not apply, it is residential-only.
Worked example, stated so you can swap your own numbers:
| Input | Value | Basis |
|---|---|---|
| Plant size | 100 kW | Suits a small dal mill or large chakki unit |
| Cost | ₹23,00,000 ex-GST (~₹25,05,000 with GST) | Sun Wave reference rate; survey final |
| Generation | 1,20,000 kWh/year (1,200 kWh/kWp) | North India irradiance; confirm in simulation |
| Self-consumption | 90% (1,08,000 kWh) | Daylight-running mill |
| Tariff displaced | ₹7.50/kWh | Typical industrial tariff band; check your bill |
| Year-1 savings | 1,08,000 x ₹7.50 = ₹8,10,000 | Energy line only |
| Simple payback | ₹25,05,000 / ₹8,10,000 ~3.1 years | Ex-GST basis ~2.8 years |
At the low end of industrial tariffs (about ₹7/unit) payback stretches to roughly 3.3 years; in states or slabs near ₹8.50 it compresses toward 2.7. Accelerated depreciation under the Income Tax Act improves after-tax returns for profitable mill owners, see the tax benefits guide and the AD vs 115BAA comparison. If your mill also burns diesel for backup, add the genset savings separately, our solar vs DG cost comparison covers the arithmetic.
Roof, Structure and Location Notes
- Structure. Mill sheds are usually light steel trusses; a load assessment decides whether rails go on the existing sheet or the roof needs strengthening. Start with our structural load assessment and tin-shed mounting guide.
- Dust. Grain handling dust settles on panels and cuts output; plan cleaning frequency into the O&M contract rather than trusting a generic schedule, see the cleaning schedule guide and the commercial O&M buyer's guide.
- Approval path. Net metering or net billing runs through your state discom; the national application-process guide and the state-wise surplus export rates show what to expect.
RESCO: Solar Without Capital Outlay
If working capital is committed to grain procurement, a RESCO developer can own the plant and sell you power at a fixed tariff under a power purchase agreement, no capital expenditure, typically a 15-25 year contract at a rate below your grid tariff. The trade-offs (tenure, escalation, exit clauses) are compared in our RESCO vs CAPEX guide and the PPA structure guide.
Frequently Asked Questions
How many kW of solar does a flour mill need?
A commercial atta chakki processing 5 tonnes a day uses roughly 250-300 units on milling alone (about 5.7 kWh per quintal), pointing to a 15-30 kW plant; a small dal mill using 128,000 kWh a year points to 70-90 kW sized to daytime load. Size from your own bills, not benchmarks.
How much does solar cost for a mill?
At Sun Wave's reference rate for qualifying CAPEX rooftop projects, a 100 kW plant is ₹23,00,000 ex-GST (about ₹25 lakh with GST); 500 kW scale lands near ₹22,000/kW ex-GST. Smaller systems price per-kW higher after the site survey sets the final figure.
What payback can a dal mill expect?
About three years for a daylight-running mill: a 100 kW plant generating 1.2 lakh units a year with 90% self-consumption saves roughly ₹8 lakh a year at ₹7.50 per unit against a ₹25 lakh cost with GST.
Do flour and dal mills get any solar subsidy?
No central capital subsidy: PM Surya Ghar covers only homes, RWAs and group housing. Mills benefit instead from accelerated depreciation, GST input credit (conditional, check with your tax adviser) and, where offered, state industrial incentives.
Is solar viable if my mill runs only in winter?
Seasonal milling weakens the case: solar generates year-round while a winter-only mill can use only part of it. Export credits recover some value, but payback typically stretches well past five years, model it honestly or consider a RESCO route.
Can solar run the mill during power cuts?
A standard grid-tied plant shuts down during outages (anti-islanding). To ride through cuts you need battery storage or a solar-compatible inverter setup, see the on-grid vs off-grid vs hybrid comparison for factory-scale options.
Sun Wave Technologies engineers rooftop solar for agro-processing and industrial units across Delhi-NCR, Haryana, Rajasthan and UP. Compare our Faridabad industrial solar delivery, the rice mills guide, cold storage solar or the food processing industry guide.
Ready to Go Solar?
Get a free consultation and custom quote for your industrial or commercial facility. Start saving on energy costs today.
Get Free Quote